Products

Acutech Manufacturing Co. Pvt. Ltd. is a manufacturer, exporter and importer of a gamut of precision engineered machines and tools. Our wide array of products encapsulates the following: Sprinklers, Small Guns, Air Relief Valves, Irrigation Products, Part Circle Sprinklers, Aluminum Accessories, Roof Drains, Floor Drains, Scupper Drains, SS Casting, Floor Clean Out, Jali Traps.

Product

Specifications

NS-05
1-1/4" Metal Sprinkler

 

 

 



Application
Designed for Agricultural,Horticulutre, larger farms, Sugarcane farms,tea garden and Fertilizer disbursement.

Features
  • Brass Bearing Construction

  • 23 deg. Trajectory.

  • 1-1/4" BSP Male Threads.

  • Pressure dia cast aluminium body & arm

  • Stainless steel spring & pivot pin.


Performance Chart of 1-1/4" Full Circle Sprinkler NS-05
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

(A) 9.5 x 5.5

4.00 48.20 152.00
5.00 51.60 169.20
6.00 53.40 184.20
7.00 54.80

207.80

 
10.3 x 5.5 4.00 50.80 175.00
5.00 53.60 192.20
6.00 55.00 215.60
7.00 56.90 231.00
 
12.7 x 6.35 4.00 55.80 250.00
5.00 60.00 272.80
6.00 62.40 310.00
7.00 64.00 330.00
 
13.5 x 6.35 4.00 57.40 278.30
5.00 61.80 304.60
6.00 62.90 335.00
7.00 64.80 385.60
*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size
 

NS-04
1" Full / Part Circle Metal Sprinkler

 

 

 

 



Application
Best suited for pastures, mining and waste water treatment.

Features
  • Brass Bearing Construction

  • 33 deg. Trajectory.

  • 1" Male NPT/BSP connection.

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability.

  • 20 deg. to 340 deg. Arc or full circle operation

  • Sure seal sand load bearing assembly

  • Chemical resistant bearing seals.

  • Cast brass trip assembly

  • Adjustable diffuser pin


Performance Chart of 1" Part Circle Sprinkler NS-04
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

6.35 x 3.17

3.00 31.60 55.70
4.00 33.00 63.50
5.00 37.10

71.00

 
(A) 7.14 x 3.17 3.00 33.40 66.00
4.00 37.30 75.70
5.00 40.90 83.60
 
7.93 x 3.17 3.00 35.20 76.90
4.00 38.10 88.00
5.00 41.50 97.20
 
8.73 x 3.17 3.00 36.50 86.60
4.00 39.20 109.00
5.00 42.10 110.00

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-01 (2N)
1/2" Metal Sprinkler

 

 



Application
Designed for agricultural use in center pivots, crop cooling & frost control.


Features
  • Full circle impact sprinkler.

  • Anodize aluminium drive arm for long life and smooth operating.

  • Brass Bearing Construction.

  • Double side drive arm with double nozzle.

  • 1/2" Male NPT connection.

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability

  • Engineering Plastic "PBT" body is super strong and impact resistant.
     

Performance Chart of 1/2" Full Circle Sprinkler NS-01 (2 Nozzle)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

3.1 x 2.5

1.00 18.50 14.00
2.00 21.00 15.00
3.00 23.50 17.00

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

   

NS-05 (3N)
1-1/4" - 3 Nozzle Metal Sprinkler

 

 



Application
Designed for all Agricultural, Horticulture, Large farms, Sugarcane Farms, Tea garden and Fertilizer disbursment.


Features
  • 1-1/4" BSP Male Threads.

  • 23 deg. Trajectory.

  • Aluminium body & Bronze arm.

  • Brass Bearing Construction

  • Stainless steel fulcrum pin, arm spring & bearing spring.


Performance Chart of 1 1/4" Full Circle Sprinkler NS-05 (3N)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

(A) 10.3 x 9.5 x 5.5

4 53 275
5 55 295
6 58 315
7 60 338

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-01 (P)
1/2" Mini Sprinkler System

 

Application
Designed for Micro irrigation use in center pivots, Cauliflower, Strawberry, Crop cooling, Nursery & frost control.


Features
  • Engineering plastic material for extra life.

  • Environment friendly, avoids leaching of soil & fertilizers in ground water.

  • Uniform application of fertilizer - even for organic manure application.

  • Stainless steel fulcrum pin, arm & bearing spring.

  • Easy to install & dismantle.

  • Easy visual operation.

  • Low operating pressure, thus energy saving.

  • Distance between sprinkler, 10 - 12 mtr.

   

NS-02 (X)
3/4" Metal Sprinkler

 

 

 



Application
Designed for agricultural use in center pivots, Solid sets, large area landscape irrigation mining & logging industries.


Features
  • Full circle impact sprinkler

  • Bronze body & arm for extra strength

  • Brass bearing construction

  • 25 deg. Trajectory

  • 3/4" Male NPT connection

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability

  • Ideal for most solid set and portable application

  • Chemical resistant bearing seals


Performance Chart of 3/4" Full Circle Sprinkler NS-02 (X)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

(A) 3.57 x 2.38

2.00 24.40 16.30
3.00 25.10 20.30
4.00 26.30

24.00

 
3.97 x 2.38 2.00 25.50 19.80
3.00 26.50 24.10
4.00 28.00 27.80
 
4.36 x 2.38 2.00 26.10 22.50
3.00 27.50 27.80
4.00 29.60 32.20
 
4.76 x 6.35 2.00 26.50 26.30
3.00 28.90 32.00
4.00 31.20 37.00

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

   

NS-04 (X)
1" Metal Sprinkler

 

 

 

 



Application
Best suited for pastures, mining and waste water treatment.

Features
  • Bronze body & arm for extra strength

  • Brass bearing construction

  • 23 deg. Trajectory

  • 1" Male NPT/BSP connection

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability

  • 20 deg. to 340 deg. Arc or full circle operation

  • Chemical resistant bearing seals

  • Cast brass trip assembly


Performance Chart of 1" Part Circle Sprinkler NS-04 (X)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

6.35

3 32.30 45.00
3.5 33.30 49.00
4 34.90 53.00
5 37.10

55.00

 
(A) 7.14 3 33.70 54.20
3.5 35.20 60.00
4 37.10 64.50
5 40.70 70.00
 
7.93 3 35.20  
3.5 37.00 70.00
4 39.00 77.00
5 41.30 83.60
 
8.73 3 36.20 74.30
3.5 38.20 82.00
4 40.80 88.00
5 42.00 96.00

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-02 (Brass)
3/4" Pressure Diecasting Sprinkler

 

 

 

 



Application
Designed for agricultural use in center pivots, solid sets, large area landscape irrigation mining & logging industries.

Features

  • Full circle brass impact sprinkler.

  • 24 deg. Trajectory.

  • 3/4" Male NPT/BSP connection.

  • Single or Dual nozzle.

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability.

  • Ideal for most solid set and portable application.

  • Chemical resistant bearing seals.

  • Pressure Die Cating Arm & Body.

  • BIS Approved - ISI Marked


Performance Chart of 3/4 " Full Circle Sprinkler NS-02 (Brass)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

4.36 x 3.17

2.00 22.00 20.00
2.50 24.50 24.00
3.00 26.00 29.00
3.50 27.00

35.00

 
4.76 x 3.17 2.00 23.00 25.00
2.50 25.00 28.00
3.00 26.9 32.00
3.50 28.00 37.00
 
(A) 5.15 x 3.17 2.00 25.00 34.00
2.50 28.00 36.50
3.00 30.00 38.00
3.50 32.00 41.00

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-01
3/4" Pressure Diecasting Sprinkler

 

 

 

 

 

 



Application
Designed for agricultural use in center pivots, crop cooling, Nursery & frost control.

Features
  • Full circle impact sprinkler.

  • Bronze Body & arm for Extra strength

  • Brass Bearing Construction

  • 25 deg. Trajectory.

  • 1/2" Male NPT/BSP connection.

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability.

  • Ideal for most solid set and portable application.


Performance Chart of 1/2 " Full Circle Sprinkler NS-01
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

2.4

2.00 20.00 4.70
2.50 21.00 5.40
3.00 23.00 5.80
3.50 23.50

6.40

 
2.8 2.00 20.60 75.10
2.50 21.8 7.80
3.00 23.20 8.80
3.50 23.80 9.20
 
(A) 3.1 2.00 21.20 9.00
2.50 22.40 9.50
3.00 23.50 10.40
3.50 24.00 11.50
*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size
 

NS-02
3/4" Metal Sprinkler

 

 

 

 

 




Application
Designed for agricultural use in center pivots, solid sets, large area landscape irrigation mining & logging industries.

Features
  • Full circle impact sprinkler.

  • Bronze Body & arm for Extra strength

  • Brass Bearing Construction

  • 27 deg. Trajectory.

  • 3/4" Male NPT/BSP connection.

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability.

  • Ideal for most solid set and portable application.

  • Chemical resistant bearing seals.

  • BIS Approved - ISI Marked


Performance Chart of 3/4 " Full Circle Sprinkler NS-02
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

4.36 x 3.17

2.00 22.00 20.00
2.50 24.00 24.00
3.00 26.00 29.00
3.50 27.00

35.00

 
4.76 x 3.17 2.00 23.00 25.00
2.50 25.00 28.00
3.00 26.90 32.00
3.50 28.00 37.00
 
(A) 5.15 x 3.17 2.00 25.00 34.00
2.50 28.00 36.50
3.00 30.00 38.00
3.50 32.00 41.00
*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size
 

NS-03
3/4" Metal Sprinkler

 

 

 

 



Application
Designed for Agricultural,larger farms, Horticulutre and Fertilizer disbursement.

Features
  • Full circle impact sprinkler.

  • Bronze Body & arm for Extra strength

  • Brass Bearing Construction

  • 33 deg. Trajectory.

  • 3/4" Male NPT/BSP connection.

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing reliability.

  • Ideal for most solid set and portable application.

  • Chemical resistant bearing seals.

  • BIS Approved - ISI Marked


Performance Chart of 3/4 " Full Circle Sprinkler NS-03
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

(A)5.55 x 3.17

2.00 28.20 37.00
2.50 32.40 40.80
3.00 34.50 46.20
3.50 35.20

50.10

 
5.95 x 3.17 2.00 31.80 39.00
2.50 33.00 43.80
3.00 34.80 51.20
3.50 35.80 54.30
 
6.35 x 3.17 2.00 32.40 42.80
2.50 34.00 48.60
3.00 35.20 56.20
3.50 38.00 62.40
*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size
 

NS-01 (P.C)
1/2" Plastic Part Cicle Sprinkler

 

 


Application
Specifically designed for Micro Irrigation of field edges, Use in center pivots, crop cooling, Nursery control.

Features

  • 1/2" Male Threaded Sprinkler

  • 20" to 340" arc or full circle operation.

  • Anti-backsplash drive arm.

  • High-impact, heavy duty plastic construction

  • Trajectory Angle 25"

  • Adjustable diffuser pin.

  • Color-Coded byaonet nozzles for easy dervice.


Performance Chart of 1/2" Part Circle Plastic Sprinkler NS-01(P.C)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM
2.8 Orange (A) 2.0 22.0 7.5
3.0 23.0 9.1
4.0 24.0

10.5

 
3.0 2.0 23.0 8.5
3.0 24.0 10.5
4.0 25.0 12.0
 

NS-02 (P.C)
3/4" Metal Sprinkler

 

 

 

Application
Designed for agricultural use in center pivots, solid sets, large area landscape irrigation.

 

Features
  • Full or Part Circle Impact sprinkler

  • Bronze Body & arm for Extra strength

  • Brass Bearing Construction

  • 25 deg. Trajectory

  • 3/4" Male NPT connection

  • Single nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring for long wearing

  • reliability

  • Ideal for most solid set and portable application

  • Chemical resistant bearing seals

  • Adjustable diffuser pin
     

Performance Chart of 3/4" Part Circle Sprinkler NS-02 (P.C)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

4.36

2.00 25.30 17.00
3.00 26.30 20.60
4.00 28.10

24.20

 
4.76 2.00 25.80 19.90
3.00 26.90 25.00
4.00 28.80 29.00
 
(A) 5.6 2.00 26.50 24.50
3.00 27.50 30.00
4.00 29.50 35.40

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-06 (P.C)
1-1/4" Metal Sprinkler

 

 



Application
Designed for all Agricultural, Horticulture, Large farms, Sugarcane Farms, Tea garden and Fertilizer disbursment

 

Features
  • Bronze Body & arm for Extra strength

  • Brass Bearing Construction

  • 1-1/4" BSP Male NPT/BSP Thread

  • 23 deg. Trajectory

  • Full or Part circle Impact Sprinkler

  • Adjustable arc from 20 deg. to 340 deg. or full circle coverage

  • Single or Dual nozzle

  • Stainless steel fulcrum pin, arm spring & bearing spring & arc stops for long wearing and liability

  • Sure seal sand load bearing assembly.
     

Performance Chart of 1-1/4" Part Circle Sprinkler NS-06 (P.C)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

(A) 9.5 x 5.5

4.00 48.90 157.50
5.00 52.00 170.00
6.00 53.90 196.00
7.00 55.10

208.50

 
10.3 x 5.5 4.00 51.00 176.80
5.00 54.10 193.00
6.00 55.60 217.00
7.00 57.50 232.20
 
12.7 x 6.35 4.00 56.10 252.50
5.00 60.50 273.00
6.00 62.90 313.50
7.00 64.60 331.00
 
13.5 x 6.35 4.00 58.00 279.00
5.00 62.30 305.50
6.00 63.40 342.00
7.00 66.40 361.50

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

   

NS-11(P.C)
3/4" Part-Circle Plastic Impact Sprinkler

 

 



Application
Agriculture, Horticulture, Golf Course, Wheat & Vegetable etc. Ideal for most solid sets, large area landscape irrigation.


Features
  • Full or Part circle Impact Sprinkler

  • Arm, Body, Nozzles & Bearing of Derlin Material for long life.

  • 3/4" Male BSP connection.

  • High-impact, Heavy duty plastic materials provide resistance ot corrosion.

  • Available in brass and plastic nozzle.

  • High-energy hammer.

  • Stainless Steel pin & spring.
     

Performance Chart of 3/4" Plastic Part Circle Sprinkler NS-11(P.C)
Nozzle Size in mm Pressure in Kg / Cm2 Diameter in Meter Discharge in LPM

4.36 x 3.17

2.50 25.80 25.00
3.00 27.20 28.70
3.50 28.00 30.30
4.00 28.60

32.90

 
4.5 x 3.17" 2.50 26.70 30.00
3.00 27.80 33.10
3.50 28.40 36.50
4.00 29.20 42.00
 
(A) 5.1 x 3.1 2.50 27.40 37.10
3.00 28.30 42.20
3.50 29.20  44.66
4.00 29.80 48.50
   

NS-10
Jaguar Sprinkler Gun

 

 

 

 



Application
  • Field crop-sugarcane, groundnut, maize, wheat, grams & pulses

  • Tea estates & Coffee plantation

  • Dust suppression

  • Green pastures

  • Sports field

  • Golf courses



Specification
  • 1-1/2" BSP female thread.

  • Aluminium alloy body & arm

  • Stainless steel spring & pivot pins

  • Gunmetal & Teflon bearing assembly

  • Engineering plastic components


NS-10 Full Circle & Part Circle. 1-1/2" Jaguar Sprinkler Gun
Nozzle Size in mm 12 x 5.1 14 x 5.1 (A) 16 x 5.1 18 x 5.1
Pressure at Sprinkler/Head Dia. of coverage in M Discharge in LPM Dia. of coverage in M Discharge in LPM Dia.  of coverage in M Discharge in LPM Dia.  of coverage in M Discharge in LPM
2 kg/cm2 40 150 42 192 44 245 56 375
3 kg/cm2 48 180 50 235 52 300 60 432
4 kg/cm2 55 210 57 275 58 350 67 485
5 kg/cm2 60 230 62 305 65 388 72 530

*Performance is based on ideal conditions of Temperature, Wind Velocity and Humidity (A) Standard nozzle size

 

NS-11
Plastic Sprinkler

 



Application
Agriculture, Hoticulture, Golf course, Wheat & Vegetables etc. Ideal for most 
solid set and portable application.

Specification
  • Arm, body nozzles & bearing of derlin material fro long life
  • Trajectory angle 23 degree.
  • Connection size - 3/4" BSP
  • Lockable design of nozzles for cleaning the sprinkler
  • Stainless steel pin & spring

Features
  • Economically easy to install.
  • Uniformity of water distribution very high even in windy conditions.
  • Long life product made of high quality engineering plastic.
  • Designed to ensure no damage to crop.

Performance Chart
Main Nozzle Spreader Nozzle Pressure in kg/cm2 Dia. in meter Discharge in LPM Spacing (m) Sprinkled area
5.1 3.1 1 21 23 12 x 12 144
5.1 3.1 2 24 30 12 x 12 144
5.1 3.1 3 28 37 12 x 12 144

*Performance is based on ideal conditions of Temperature, Wind Velocity and  Humidity (A) Standard nozzle size

 
NS-12

NS-12 QRC in Brass
  • Available in 3/4" & 1" female BSP & NPT connection.

  • Solid brass construction fro durability economy & recyclability.

  • Minimise debris collection bt Drain hole in body.

  • Specially disgned grommet for good working.

  • Lockable options available in this model.

  • Brass plunger & stainless steel spring to eliminate corrosion.


NS-12 QRC in Aluminium
  • Size available in 1-1/4" & 1-1/2" BSp.

  • Double piece construction bolt mounted for easy to clean.

  • Brass valve & stainless steel spring for long life.

 
NS-13
1" in Plastic 1-1/2" & 2" in Aluminium

Air Vents
Air cum vaccum relaese valve

Uses
Air vents are designed fro evacuation of air when filling a pipe live and provide positive vaccum relief when pipe is draining. Use in gravity od higher pressure system.

Features
  • AV mode a semi hard, precision ground inner solid plastic flort ball. The float seats against a precision O Ring providing a tight seal at very low pressure where other vents often leak. They have excellent seating characteristics & aparate trouble-free at pressure up to 10 kg/cm2.

  • AV are made with standard female pipe threads which should be protected with "Never Seize" or equivalent when installed.

 
NS-14
Pressure Release Valve

Application
Pressure relief valve are designed to provide effective pressure surge protection fro aluminium and high pressure plastic pipe sprinkler systems

Features
  • Provides pressure surge protection for irrigation system

  • Adjustable pressure setting maximizes performance for individual application

  • High strength cast aliminium body, stainless steel shaft offer strength & corrosion resistance.

  • Oil tempered coil spring provide responsive operation for individual pressure range.

  • Nomal pressure : 80 PSI

 
 CRO Aluminium Coupler & Aluminium end plug

  • Size available in 75mm
  • long life aluminium couplers - no rusting
  • NEER couplers are cast aluminium made by the superior mould process in our own Quality controlled - Aluminium division - give extra strength gaurds against destructive rust
 
Foot Button C-Clamp & Latch Clamp
  • Foot Button C-Clamp & Latch Clampare available in all size and also available in powder coated, yellow platting & hot dip galvanized.
   

Acutech at a Glance

Establishment

Acutech Mfg. Co. Pvt. Ltd. was established in 1995 to manufacture castings of ferrous and non ferrous metals for industrial purposes.

People

the company has a great team to support across all functions. the company has a very good retention record.

R & D

The company has manufacturing and testing facility in Delhi. It is staffed by capable team of engineers who ensure the products are reliable.

Focus Areas

customer responsiveness, services and delivery at low cost, introduse low cost and high quality products in high volume in market.